Will Liquid Nails Bond To Linoleum

Home Projects Repair High Temperature Adhesive

Cardinal Features

Withstands temperatures from -60° to 300°F
Acrid free / Depression odor
Flexible & shock arresting
Works on wet surfaces
Indoor & outdoor
Patented technology
Can fill gaps up to 1/four" (6mm)
Contributes to LEED® certification
GREENGUARD Children & SchoolsSM Certification
Contributes toward NAHB National Green Building Standard™ certification of the structure

Recommended For:

fabric, wood, metallic, leather, ceramic, cream, condom, sail, rock, cardboard, brick, marble, physical, plastics.*
*Will not bond polyethylene or polypropylene.

Not Recommended For:

sail goods, forest flooring, aquariums or other underwater applications.

Available Sizes

0.75 fl. oz. clasp tube

Coverage

0.75 fl. oz. squeeze tube covers ix lineal ft.

Max VOC

52 GPL

Surface Preparation

Surfaces must exist clean and costless from any loose matter before applying this high temperature adhesive. Surfaces may exist damp. Employ this high temperature agglutinative to one surface. For faster bonding, dampen surfaces lightly with water before applying the high temperature adhesive.

General Application

Printing surfaces together within v minutes afterward applying this loftier temperature adhesive. For better tackiness, pull surfaces back apart for 3-v minutes, then rejoin. Surfaces may exist adapted for 10 minutes afterwards joining. This loftier temperature adhesive will reach initial cure in one hour and full cure in half dozen-eight hours.

Sealing A Tear

If ends cannot exist overlapped, and then lay ends as close together as possible. Lay a bead of high temperature adhesive over entire tear and a little past each end. Smooth the dewdrop of high temperature adhesive and so that information technology forms a thin film on both sides of tear. Wipe away excess high temperature adhesive with a dry material.

Bonding Pieces End-to-End

Find a suitable slice to use every bit a "splint" to reinforce the repaired joint. Apply loftier temperature adhesive to the splint over the area that will exist in contact with the repaired piece. Employ loftier temperature adhesive to both ends of articulation. Bring together all pieces together every bit desired and brace or clamp.

Plastics, Metals, and Not-Porous Surfaces

Plastics, metals, and non-porous surfaces that can be bonded with this loftier temperature adhesive include aluminum, steel, brass, PVC, fiberglass, rubber, neoprene, nylon, ABS, and polystyrene. Home PROJECTS cannot exist used to bond polyethylene or polypropylene. Use a dewdrop of high temperature adhesive to one of the surfaces to exist bonded. Spread the bead of high temperature adhesive to encompass the surface to be bonded. Bring together the surfaces together, and then pull them apart and let stand for five minutes before pressing back together. For a quicker bail, mist the surfaces lightly with water before rejoining. Let i hr before light use and 8 hours earlier normal use.

Cleanup

If this high temperature adhesive is wet, wipe it abroad with a clean textile. If the high temperature adhesive has dried, scrape information technology away.